MP Controller display restarts constantly (flickering)
The cause for this is that the monitor does not receive enough power.
These steps may help to resolve the problem.
- use a different USB port from the computer that provides more power.
- use shorter USB cables (1m recommended cables here in section USB-C to USB-A )
- use a powered USB hub
- use a Y-cable for Model 1A/1A+
On model 2A you can use the additional power port to provide more power using a wall adapter 5V/2A minimum or a power bank as explained here
For model 1A+ and model 2A If when changing the brightness or switching to a preset with high brightness (such us the FPS) the monitor restarts, it means is not receiving enough power to support the level of brightness.
For mode1 1A+ you also have the option to connect a wall adapter on the internal LCD board which has an additional USB-C port. To get to that port you have to unscrew the bottom cover.
For model 1A use the Y-cable to provide additional power.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article